Luger PO8 mainspring guide – must be fitted, #10-32

(1 customer review)

$40.00

Parts sold singly unless noted
SKU: 10-32 Category:

Description

Reproduction, must be fitted

This part is manufactured of a more modern, high quality steel, using original 1913 Erfurt specs for duplication.  Some parts may need additional fitting to accommodate wear in old firearms.

Sorry, we are unable to do any international sales of firearms parts due to excessive cost and regulations.

Additional information

Weight0.5 lbs
Dimensions12.5 × 9.5 × 0.25 in
Condition

1 review for Luger PO8 mainspring guide – must be fitted, #10-32

  1. Forensic

    The mainspring guide for a P08 style Luger is a hard part to find in surplus, but Jack First had them and I need the part! Part was ordered and received very quickly! Finally got some time to fiddle with replacing the mainspring guide in my 1906 Portugues Luger which had been converted to .45 ACP about 60 years ago! A disclaimer noted that the parts would need fitting and I was prepared to do that. Inspecting and measuring the broken part to the new (repro) part, I discovered that the measurements were within tolerance and it appeared no fitting was required. I was right and the mainspring guide dropped in and my pistol is back in serviceable condition. Great Service and parts.

Add a review